Home BMW 3.0 3.0 CS

BMW 3.0 CS is a rear wheel drive (RWD), 2-door fixed-head coupe that has 4 seats. This model has been introduced in 1971. The measurements of the vehicle are as follows: height - 1371.00 mm, length - 4660.00 mm, width - 1671.00 mm. In addition, the lengths of the rear and front track of this model are 1421.00 mm and 1445.00 mm respectively and its wheelbase is 2666.00 mm. 1401 kg is the curb weight of this automobile. The BMW 3.0 CS engine is 6-cylinder with 2 valves per cylinder, single overhead camshaft (SOHC), 2986 cc, naturally-aspirated. It is mounted in the front of the vehicle and its alignment is longitudinal. The cylinders inside are inline-arranged. The cylinder diameter is 89.00 mm and the piston stroke length is 80.00 mm. The pistons compression ratio is 9.00:1. The maximum power and maximum torque delivered by the engine are 132 kW / 180 ps at 6000 rpm and 254 Nm at 3700 rpm respectively. This model has a carburettor fuel system. The oiling system used for lubricating the engine's parts is wet sump. The vehicle can accelerate from 0 to 100 km/h for 8.20 s and from 0 to 60 mph for 8.00 s. The automobile makes a quarter mile for 16.20 s and one kilometer for 29.70 s. The BMW 3.0 CS has a manual 4-speed transmission. The top gear ratio is 1.00:1. 3.45:1 is its final drive ratio. The fuel tank has a volume of 70.00 l. The front suspension includes anti-roll bar, coil springs, independent, lower wishbone and the rear suspension - anti-roll bar, coil springs, independent, semi-trailing arm. The front wheels size is 6J x 14 H2. The size of the rear wheels is 6J x 14 H2. The front brakes have with disks. The rear brakes are equipped with disks, servo assistance. The rear brakes diameter is 272.00 mm and the front brakes one is 272.00 mm.