Alfa Romeo 147 1.9 JTD is a 5-seat, front wheel drive (FWD) hatchback that has 3 doors. This model is presented in 2004. The automobile has the following dimensions: length - 4224.00 mm, height - 1443.00 mm, width - 1729.00 mm. Additionally, its rear and front track are 1503.00 mm and 1517.00 mm respectively and its wheelbase is 2547.00 mm. 1289 kg is this automobile's curb weight. The engine of Alfa Romeo 147 1.9 JTD is 4-cylinder with 4 valves per cylinder, turbocharged and has an engine displacement of 1910 cc and double overhead camshaft (DOHC). It is placed in the front of the vehicle and its alignment is transverse. It also has inline-arranged cylinders. The length of the piston stroke is 90.40 mm and the diameter of the cylinders is 82.00 mm . The pistons compression ratio is 18.00:1. The engine generates maximum power of 110 kW / 150 ps at 4000 rpm and maximum torque of 306 Nm at 2000 rpm. The fuel system of this model is direct diesel injection. The oiling system of the engine is wet sump. From 0 to 100 km/h the vehicle can accelerate for 8.80 s. It takes 30.00 s for the vehicle to make one kilometer from a standstill. The Alfa Romeo 147 1.9 JTD has a manual 6-speed transmission. 0.61:1 is the top gear ratio. 3.56:1 is its final drive ratio. This automobile has a combined fuel consumption of 5.89 l/100 km, extra urban of 4.66 l/100 km and urban fuel consumption of 8.03 l/100 km. 60.00 l is the volume of the fuel tank. The rating of CO2 emissions is 157 g/km. The steering system of the vehicle is power assisted rack and pinion type. The rear suspension includes anti-roll bar, independent, MacPherson strut and the front suspension - anti-roll bar, double wishbones, independent, trailing arm. The type/size of the front tyres is 205/55 R 16. The type/size of the rear tyres is 205/55 R 16. The front brake system includes ventilated disks. The rear brake system includes disks, servo assistance, anti-lock braking system (ABS). The rear brakes diameter is 251.00 mm and the front brakes one is 284.00 mm.
Brand name
The name of the company, which has manufactured this vehicle.
Alfa Romeo
The series the vehicle's model belongs to.
Model name
The model name of the vehicle.
147 1.9 JTD
Model code
The code provided by the manufacturer, which marks this model.
Model family
A family this model belongs to.
Produced since
The year since the model has been in production.
Type of vehicle
Information about the body type of this vehicle.
Drive system
The type of the drive system used in the vehicle.
front wheel drive (FWD)
Number of seats
The number of seats the vehicle has.
Number of doors
The number of doors the vehicle has.
The distance from the rear-most point to the front-most point of the vehicle.
4224.00 mm (millimeters)

166.2992 in (inches)

13.8583 ft (feet)
The width of the vehicle. Devices like door handles, mirrors and lights usually are not included in the calculation of the width. The width is measured with doors and windows closed and the wheels in a straight-ahead position.
1729.00 mm (millimeters)

68.0709 in (inches)

5.6726 ft (feet)
The distance from the floor to the top-most part of the vehicle.
1443.00 mm (millimeters)

56.8110 in (inches)

4.7343 ft (feet)
The horizontal distance between the centers of the front and rear wheels. The distance between the front and rear axle.
2547.00 mm (millimeters)

100.2756 in (inches)

8.3563 ft (feet)
Front track
The distance between the centers of the wheels on the front axle.
1517.00 mm (millimeters)

59.7244 in (inches)

4.9770 ft (feet)
Rear track
The distance between the centers of the wheels on the rear axle.
1503.00 mm (millimeters)

59.1732 in (inches)

4.9311 ft (feet)
Ground clearance
The distance from the lowest hanging point under the vehicle to the ground, measured with standard vehicle equipment, without cargo or passengers.
The weight of a vehicle with standard equipment and all necessary operating consumables, without passengers or cargo.
1289 kg (kilograms)

2841.76 lb (pounds)
Weight front/rear
The percentage of weight distribution on the front and rear tyres.
Engine manufacturer
The name of the company, which has manufactured the enginge.
Alfa Romeo
Engine code
The code of the engine.
Engine displacement
The total volume of the air/fuel mixture an engine can produce during one complete cycle. The engine displacement is the sum if the displacement of its cylinders, which includes the volume of the space between the upper and lower dead point of every cylinder.
~ 1.9 l (liters)

1910 cc (cubic centimeters)
Number of cylinders
The total number of cylinders in the engine. A cylinder is the space, in which a piston moves between it's upper and lower dead point.
Cylinder arrangement
Information on how the cylinders in the engine are arranged. Some of the most common arrangements are: Inline, V and Boxer (opposite).
Valves per cylinder
Most engines have two or more valves per cylinder to control the flow of gases and fluids at proper timings. Intake valves are used to control the flow of air and fuel into each cylinder, while the exhaust valves make sure exhaust gases leave the cylinder.
The diameter of the cylinder in the engine. Most internal combustion engines have bores in the 70 mm - 105 mm range.
82.00 mm (millimeters)

3.2283 in (inches)

0.2690 ft (feet)
The length of the piston stroke within the cylinders. The distance the piston travels back-and-forth between it's upper and lower dead point.
90.40 mm (millimeters)

3.5591 in (inches)

0.2966 ft (feet)
Compression ratio
The ratio between the largest and the smallest volume of the combustion chamber when the piston is at the top of its stroke (smallest volume) and the bottom of its stroke (largest volume).
Break mean effective pressure is the average pressure that acts on the piston. The higher the pressure is, the more optimized design has been achieved. BMEP takes into account engine's volume, rpm and power output.
290.97 psi (pounds per square inch)

2006.17 kPa (kilopascals)

20.06 bar (bars)
The type of aspiration. Some engines are naturally aspirated, while others are turbo/supercharged.
Engine design
The design of the engine in regards to the number and arrangement of camshaft(s), intake and exhaust valves, etc.
double overhead camshaft (DOHC)
Sump type
The lubricating oil system used to oil the engine's parts. Lubrication prevents friction and respectively - wearing out of the elements, which are in contact while the engine is working. There are two main types of sump systems - wet and dry.
wet sump
Main bearings
The main bearings are the bearings on which the crankshaft rotates. The number of main bearings depends on the engine type.
The type of engine coolant system used to remove the heat from the engine.
An air-to-air or air-to-liquid heat exchange device used between the turbo and the intake manifold to reduce the temperature of the air, which increases its density.
Engine location
The location of the engine in the vehicle - whether it is front mounted, middle mounted or rear mounted.
Engine alignment
The alignment/orientation of the engine in the vehicle. A transverse engine is mounted so that the engine's crankshaft axis is perpendicular to the long axis of the vehicle. Longitudinal engine is mounted so that the crankshaft is paralel to the long axis of the vehicle.
Fuel system
The fuel system type used to store and supply fuel in the cylinder chamber.
direct diesel injection
Catalytic converter
It reduces the toxicity of the emissions from the engine by causing a chemical reaction that transforms harmful gases into less harmful substances.
Max power
The maximum amount of power the engine can produce.
110 kW (kilowatts)

150 ps (Pferdestärke)

148 hp (horse power)
Max power at rpm
The number of revolutions per minute at which the engine produces its maximum power.
4000 rpm (revolutions per minute)
Max torque
The maximum torque the engine can produce. Torque is the turning effect, produced when force is applied to rotate an object around an axis, fulcrum, or pivot.
306 Nm (newton meters)

225 ft-lb (foot-pounds)

31 kgm (kilogram meters)
Max torque at rpm
The number of revolutions per minute at which the engine produces its maximum torque.
2000 rpm (revolutions per minute)
Max speed
The maximum speed the vehicle can achieve.
208 km/h (kilometers per hour)

129.25 mph (miles per hour)
Max rpm
The maximum number of revolutions per minute of the crankshaft the engine is allowed to run.
0 - 60 mph
The time in seconds in which the vehicle accelerates from 0 to 60 miles per hour.
0 - 100 km/h
The time in seconds the vehicle needs to accelerate from 0 to 100 kilometers per hour.
8.80 s (seconds)
Quarter mile time
The time in seconds the vehicle needs to do a quarter mile.
Drag coefficient (Cd/Cx/Cw)
Quantifies the resistance (drag) of the vehicle, while moving through the air. Contemporary automobiles achieve a drag coefficient from 0.30 to 0.35. Cd is also known as Cx in France and Cw in Germany
Frontal area (A)
The total surface area of the front of a vehicle that is exposed to the air flow.
Drag area (CdA)
Expresses the aerodynamic efficiency of the vehicle and is measured by multiplying the drag coefficient (Cd) and the frontal surface area (A). The lower the drag area is the more efficient aerodynamically the vehicle is.
Fuel capacity
The maximum amount of fuel that the vehicle's fuel tank can hold.
60.00 l (liters)

15.85 US gal (US gallons)

13.20 UK gal (UK gallons)
Fuel consumption - urban
The amount of fuel used by the vehicle to cover the distance of 100 kilometers where the speed varies from 0 to 50 km/h.
8.03 l (liters)

2.12 US gal (US gallons)

1.77 UK gal (UK gallons)
Fuel consumption - extra urban
The amount of fuel used by the vehicle to cover the distance of 100 kilometers where the speed varies from 80 to 120 km/h.
4.66 l (liters)

1.23 US gal (US gallons)

1.03 UK gal (UK gallons)
Fuel consumption - combined
The average amount of fuel consumed by the vehicle per unit distance in urban and extra-urban traffic.
5.89 l (liters)

1.56 US gal (US gallons)

1.30 UK gal (UK gallons)
CO2 emissions
Information about the carbone dioxide emitted by the vehicle. The average CO2 emissions rating is 167 grams of carbon dioxide per kilometer driven.
157 g/km (grammes per kilometer)
Suspension front
Information about the front suspension mechanism used in the vehicle. The mechanical system that connects the wheels and axles to the chassis of the vehicle.
anti-roll bar

double wishbones


trailing arm
Suspension rear
Information about the rear suspension mechanism used in the vehicle. The suspension contributes to the vehicle's handling and braking, isolates the passengers from the road noise and vibrations.
anti-roll bar


MacPherson strut
A transmission a.k.a gearbox adapts the output of the engine to the drive wheels. The transmission can increase the torque while reducing the speed of the crankshaft or do the opposite - reduce the torque while increasing the speed of the crankshaft.
Number of gears
The number of gears in the transmision of the vehicle.
Top gear ratio
The gear ratio of the top gear. The gears ratio expresses the ratio between the number of teeth of the larger gear and the pinion, or simply put the ratio between the gears radiuses/diameters. E.g. the ratio of a gear with 24 teeth and a pinion with 13 teeth is 1.84:1.
Final drvie ratio
The final drive ratio expresses the ratio between the number of rotations of the drive shaft for one rotation of a wheel or the ratio between the number of revolutions of the pinion for one revolution of the drive axle.
Brakes front
The brake system used on the front wheels. In general, the brake system transmits the force from the brake pedal to the brake pads, which allows the vehicle to slow down and stop.
ventilated disks
Brakes rear
Information about the brake system used on the rear wheels.

servo assistance

anti-lock braking system (ABS)
Front brake diameter
The diameter of the front brake disks. The brake disk is located between the brake pads, which when forced against both sides of the disk slow and stop the rotation of the wheel.
284.00 mm (millimeters)

11.1811 in (inches)

0.9318 ft (feet)
Rear brake diameter
The diameter of the rear brake disks.
251.00 mm (millimeters)

9.8819 in (inches)

0.8235 ft (feet)
Wheels front
The size/type of the front wheels. For example in "7.5J x 16", the first number represents the width in inches, the second one represents the height in inches. The letter J represents the wheel contour.
Wheels rear
The size/type of the rear wheels used in the vehicle.
Tyres front
The size/type of the front tyres. For example in the tyre code "225/55 R 16" the first number stands for width in mm, the second number stands for aspect ratio of height to width in %, R stands for construction type (radial) and 16 stands for wheel diameter in inches.
205/55 R 16
Tyres rear
The size/type of the rear tyres used in the vehicle.
205/55 R 16
Turning circle
The smallest possible diameter of the circle described by the outside wheels when the vehicle is turning on full lock.
Information about the design of the mechanism used in the vehicle which allows it to follow the desired course. The steering mechanism aims to ensure that the wheels are pointing in the desired directions.
power assisted rack and pinion
Turns lock to lock
The number of complete rotations a steering wheel makes when turned from one extreme lock position to the other. For example, from extreme left to extreme right.
- is not responsible for the accuracy of the information it publishes - technical data, characteristics, specifications, indicators, etc. All manufacturers' logos, marques, and all other trademarks are the property of their respective owners.
cookie policy ©