Porsche 911 Carrera is a rear wheel drive (RWD) fixed-head coupe that has 4 seats and 2 doors. It is presented in 2008. The automobile's measurements are as follows: width - 1809.00 mm, height - 1311.00 mm, length - 4435.00 mm. In addition, the lengths of the front and rear track of this model are 1486.00 mm and 1529.00 mm respectively and its wheelbase is 2350.00 mm. The curb weight of the automobile is 1416 kg. Porsche 911 Carrera has a double overhead camshaft (DOHC), naturally-aspirated engine with an engine displacement of 3614 cc and 6 cylinders with 4 valves per cylinder. It is set in the rear of the vehicle and has a longitudinal alignment. The cylinders are boxer-arranged. The diameter of the cylinders is 97.00 mm and the length of the piston stroke is 81.50 mm. The compression ratio is 12.50:1. The maximum torque produced by the engine is 389 Nm at 4400 rpm and its maximum torque is 254 kW / 346 ps at 6500 rpm. This model has a direct petrol injection fuel system. A dry sump oiling system of the engine is used for lubricating its parts. The vehicle accelerates for 4.90 s from 0 to 100 km/h. It takes 23.60 s for the vehicle to make one kilometer from a standstill. This model has a 0.5829 m2 drag area, its frontal area is 2.0100 m2 and the drag coefficient is 0.29. The Porsche 911 Carrera has a manual 6-speed transmission. The top gear ratio is 0.88:1. Its final drive ratio is 3.44:1. The extra urban fuel consumption of this automobile is 7.36 l/100 km, the combined fuel consumption is 10.29 l/100 km and the urban is 15.46 l/100 km . 64.00 l is the capacity of the fuel tank. The rating of CO2 emissions is 242 g/km. The vehicle's steering system is variable power assisted rack and pinion type. The front suspension includes anti-roll bar, independent, MacPherson strut and the rear suspension - anti-roll bar, independent, multi-link. The front wheels size is 8J x 18. The size of the rear wheels is 10.5J x 18. The size/type of tyres in the front is 235/40 ZR 18. The size/type of the rear tyres is 265/40 ZR 18. The front brakes are set up with ventilated disks. The rear brake system includes ventilated disks, servo assistance, anti-lock braking system (ABS). The rear brakes diameter is 330.00 mm and the front brakes one is 330.00 mm.
The name of the company, which has manufactured this vehicle.
The series the vehicle's model belongs to.
The model name of the vehicle.
The code provided by the manufacturer, which marks this model.
A family this model belongs to.
The year since the model has been in production.
|Type of vehicle|
Information about the body type of this vehicle.
The type of the drive system used in the vehicle.
|rear wheel drive (RWD)|
|Number of seats|
The number of seats the vehicle has.
|Number of doors|
The number of doors the vehicle has.
The distance from the rear-most point to the front-most point of the vehicle.
|4435.00 mm (millimeters)|
174.6063 in (inches)
14.5505 ft (feet)
The width of the vehicle. Devices like door handles, mirrors and lights usually are not included in the calculation of the width. The width is measured with doors and windows closed and the wheels in a straight-ahead position.
|1809.00 mm (millimeters)|
71.2205 in (inches)
5.9350 ft (feet)
The distance from the floor to the top-most part of the vehicle.
|1311.00 mm (millimeters)|
51.6142 in (inches)
4.3012 ft (feet)
The horizontal distance between the centers of the front and rear wheels. The distance between the front and rear axle.
|2350.00 mm (millimeters)|
92.5197 in (inches)
7.7100 ft (feet)
The distance between the centers of the wheels on the front axle.
|1486.00 mm (millimeters)|
58.5039 in (inches)
4.8753 ft (feet)
The distance between the centers of the wheels on the rear axle.
|1529.00 mm (millimeters)|
60.1969 in (inches)
5.0164 ft (feet)
The distance from the lowest hanging point under the vehicle to the ground, measured with standard vehicle equipment, without cargo or passengers.
The weight of a vehicle with standard equipment and all necessary operating consumables, without passengers or cargo.
|1416 kg (kilograms)|
3121.75 lb (pounds)
The percentage of weight distribution on the front and rear tyres.
The name of the company, which has manufactured the enginge.
The code of the engine.
The total volume of the air/fuel mixture an engine can produce during one complete cycle. The engine displacement is the sum if the displacement of its cylinders, which includes the volume of the space between the upper and lower dead point of every cylinder.
|~ 3.6 l (liters)|
3614 cc (cubic centimeters)
|Number of cylinders|
The total number of cylinders in the engine. A cylinder is the space, in which a piston moves between it's upper and lower dead point.
Information on how the cylinders in the engine are arranged. Some of the most common arrangements are: Inline, V and Boxer (opposite).
|Valves per cylinder|
Most engines have two or more valves per cylinder to control the flow of gases and fluids at proper timings. Intake valves are used to control the flow of air and fuel into each cylinder, while the exhaust valves make sure exhaust gases leave the cylinder.
The diameter of the cylinder in the engine. Most internal combustion engines have bores in the 70 mm - 105 mm range.
|97.00 mm (millimeters)|
3.8189 in (inches)
0.3182 ft (feet)
The length of the piston stroke within the cylinders. The distance the piston travels back-and-forth between it's upper and lower dead point.
|81.50 mm (millimeters)|
3.2087 in (inches)
0.2674 ft (feet)
The ratio between the largest and the smallest volume of the combustion chamber when the piston is at the top of its stroke (smallest volume) and the bottom of its stroke (largest volume).
Break mean effective pressure is the average pressure that acts on the piston. The higher the pressure is, the more optimized design has been achieved. BMEP takes into account engine's volume, rpm and power output.
|196.68 psi (pounds per square inch)|
1356.06 kPa (kilopascals)
13.56 bar (bars)
The type of aspiration. Some engines are naturally aspirated, while others are turbo/supercharged.
The design of the engine in regards to the number and arrangement of camshaft(s), intake and exhaust valves, etc.
|double overhead camshaft (DOHC)|
The lubricating oil system used to oil the engine's parts. Lubrication prevents friction and respectively - wearing out of the elements, which are in contact while the engine is working. There are two main types of sump systems - wet and dry.
The main bearings are the bearings on which the crankshaft rotates. The number of main bearings depends on the engine type.
The type of engine coolant system used to remove the heat from the engine.
An air-to-air or air-to-liquid heat exchange device used between the turbo and the intake manifold to reduce the temperature of the air, which increases its density.
The location of the engine in the vehicle - whether it is front mounted, middle mounted or rear mounted.
The alignment/orientation of the engine in the vehicle. A transverse engine is mounted so that the engine's crankshaft axis is perpendicular to the long axis of the vehicle. Longitudinal engine is mounted so that the crankshaft is paralel to the long axis of the vehicle.
The fuel system type used to store and supply fuel in the cylinder chamber.
|direct petrol injection|
It reduces the toxicity of the emissions from the engine by causing a chemical reaction that transforms harmful gases into less harmful substances.
The maximum amount of power the engine can produce.
|254 kW (kilowatts)|
346 ps (Pferdestärke)
341 hp (horse power)
|Max power at rpm|
The number of revolutions per minute at which the engine produces its maximum power.
|6500 rpm (revolutions per minute)|
The maximum torque the engine can produce. Torque is the turning effect, produced when force is applied to rotate an object around an axis, fulcrum, or pivot.
|389 Nm (newton meters)|
286 ft-lb (foot-pounds)
39 kgm (kilogram meters)
|Max torque at rpm|
The number of revolutions per minute at which the engine produces its maximum torque.
|4400 rpm (revolutions per minute)|
The maximum speed the vehicle can achieve.
|289 km/h (kilometers per hour)|
179.58 mph (miles per hour)
The maximum number of revolutions per minute of the crankshaft the engine is allowed to run.
|7500 rpm (revolutions per minute)|
|0 - 60 mph|
The time in seconds in which the vehicle accelerates from 0 to 60 miles per hour.
|0 - 100 km/h|
The time in seconds the vehicle needs to accelerate from 0 to 100 kilometers per hour.
|4.90 s (seconds)|
|Quarter mile time|
The time in seconds the vehicle needs to do a quarter mile.
|Drag coefficient (Cd/Cx/Cw)|
Quantifies the resistance (drag) of the vehicle, while moving through the air. Contemporary automobiles achieve a drag coefficient from 0.30 to 0.35. Cd is also known as Cx in France and Cw in Germany
|Frontal area (A)|
The total surface area of the front of a vehicle that is exposed to the air flow.
|2.0100 m2 (square meters)|
3115.5062 in2 (square inches)
21.6355 ft2 (square feet)
|Drag area (CdA)|
Expresses the aerodynamic efficiency of the vehicle and is measured by multiplying the drag coefficient (Cd) and the frontal surface area (A). The lower the drag area is the more efficient aerodynamically the vehicle is.
|0.5829 m2 (square meters)|
903.4968 in2 (square inches)
6.2743 ft2 (square feet)
The maximum amount of fuel that the vehicle's fuel tank can hold.
|64.00 l (liters)|
16.91 US gal (US gallons)
14.08 UK gal (UK gallons)
|Fuel consumption - urban|
The amount of fuel used by the vehicle to cover the distance of 100 kilometers where the speed varies from 0 to 50 km/h.
|15.46 l (liters)|
4.08 US gal (US gallons)
3.40 UK gal (UK gallons)
|Fuel consumption - extra urban|
The amount of fuel used by the vehicle to cover the distance of 100 kilometers where the speed varies from 80 to 120 km/h.
|7.36 l (liters)|
1.94 US gal (US gallons)
1.62 UK gal (UK gallons)
|Fuel consumption - combined|
The average amount of fuel consumed by the vehicle per unit distance in urban and extra-urban traffic.
|10.29 l (liters)|
2.72 US gal (US gallons)
2.26 UK gal (UK gallons)
Information about the carbone dioxide emitted by the vehicle. The average CO2 emissions rating is 167 grams of carbon dioxide per kilometer driven.
|242 g/km (grammes per kilometer)|
Information about the front suspension mechanism used in the vehicle. The mechanical system that connects the wheels and axles to the chassis of the vehicle.
Information about the rear suspension mechanism used in the vehicle. The suspension contributes to the vehicle's handling and braking, isolates the passengers from the road noise and vibrations.
A transmission a.k.a gearbox adapts the output of the engine to the drive wheels. The transmission can increase the torque while reducing the speed of the crankshaft or do the opposite - reduce the torque while increasing the speed of the crankshaft.
|Number of gears|
The number of gears in the transmision of the vehicle.
|Top gear ratio|
The gear ratio of the top gear. The gears ratio expresses the ratio between the number of teeth of the larger gear and the pinion, or simply put the ratio between the gears radiuses/diameters. E.g. the ratio of a gear with 24 teeth and a pinion with 13 teeth is 1.84:1.
|Final drvie ratio|
The final drive ratio expresses the ratio between the number of rotations of the drive shaft for one rotation of a wheel or the ratio between the number of revolutions of the pinion for one revolution of the drive axle.
The brake system used on the front wheels. In general, the brake system transmits the force from the brake pedal to the brake pads, which allows the vehicle to slow down and stop.
Information about the brake system used on the rear wheels.
anti-lock braking system (ABS)
|Front brake diameter|
The diameter of the front brake disks. The brake disk is located between the brake pads, which when forced against both sides of the disk slow and stop the rotation of the wheel.
|330.00 mm (millimeters)|
12.9921 in (inches)
1.0827 ft (feet)
|Rear brake diameter|
The diameter of the rear brake disks.
|330.00 mm (millimeters)|
12.9921 in (inches)
1.0827 ft (feet)
The size/type of the front wheels. For example in "7.5J x 16", the first number represents the width in inches, the second one represents the height in inches. The letter J represents the wheel contour.
|8J x 18|
The size/type of the rear wheels used in the vehicle.
|10.5J x 18|
The size/type of the front tyres. For example in the tyre code "225/55 R 16" the first number stands for width in mm, the second number stands for aspect ratio of height to width in %, R stands for construction type (radial) and 16 stands for wheel diameter in inches.
|235/40 ZR 18|
The size/type of the rear tyres used in the vehicle.
|265/40 ZR 18|
The smallest possible diameter of the circle described by the outside wheels when the vehicle is turning on full lock.
Information about the design of the mechanism used in the vehicle which allows it to follow the desired course. The steering mechanism aims to ensure that the wheels are pointing in the desired directions.
|variable power assisted rack and pinion|
|Turns lock to lock|
The number of complete rotations a steering wheel makes when turned from one extreme lock position to the other. For example, from extreme left to extreme right.
carinf.com is not responsible for the accuracy of the information it publishes - technical data, characteristics, specifications, indicators, etc. All manufacturers' logos, marques, and all other trademarks are the property of their respective owners.