Fiat Strada 105 TC is an automobile that has a hatchback body type. This model is unveiled in 1982. The automobile is 4014.00 mm long, 1398.00 mm high and 1651.00 mm wide. Additionally, its wheelbase is 2443.00 mm, its rear and front track are 1417.00 mm and 1418.00 mm respectively. The ground clearance of this vehicle is 130.00 mm. 906 kg is this automobile's curb weight. The engine of Fiat Strada 105 TC is naturally-aspirated and has 4 cylinders with 2 valves per cylinder, double overhead camshaft (DOHC) and engine displacement of 1585 cc. It is placed in the front of the vehicle and its alignment is transverse. It also has inline-arranged cylinders. The length of the piston stroke is 71.50 mm and the diameter of the cylinders is 84.00 mm . The pistons compression ratio is 9.30:1. The maximum power generated by the engine is 77 kW / 105 ps at 6100 rpm and its maximum torque is 133 Nm at 4000 rpm. The fuel system of this model is carburettor. wet sump is the oiling system used for lubricating the engine's parts. From 0 to 60 mph the vehicle can accelerate for 9.20 s. The automobile can make a quarter mile for 17.00 s. The Fiat Strada 105 TC has a manual 5-speed transmission. 0.96:1 is the top gear ratio. Its final drive ratio is 3.59:1. The fuel tank has a volume of 55.00 l. The vehicle's steering system is rack and pinion type. The number of lock-to-lock wheel turns is 3.5. The front suspension includes anti-roll bar, coil springs, independent, lower wishbone, MacPherson strut, trailing link and the rear suspension - independent, lower wishbone, transverse leaf spring. This automobile has a turning circle of 10.30 m. The size/type of tyres in the front is 165/65 SR 14. The size/type of tyres in the rear is 165/65 SR 14. The front brakes are equipped with disks. The rear brakes have with drums, servo assistance.
Brand name
The name of the company, which has manufactured this vehicle.
Fiat
Series
The series the vehicle's model belongs to.
Strada
Model name
The model name of the vehicle.
Strada 105 TC
Model code
The code provided by the manufacturer, which marks this model.
-
Model family
A family this model belongs to.
-
Produced since
The year since the model has been in production.
1982
Type of vehicle
Information about the body type of this vehicle.
hatchback
Drive system
The type of the drive system used in the vehicle.
front wheel drive (FWD)
Number of seats
The number of seats the vehicle has.
5
Number of doors
The number of doors the vehicle has.
-
Length
The distance from the rear-most point to the front-most point of the vehicle.
4014.00 mm (millimeters)

158.0315 in (inches)

13.1693 ft (feet)
Width
The width of the vehicle. Devices like door handles, mirrors and lights usually are not included in the calculation of the width. The width is measured with doors and windows closed and the wheels in a straight-ahead position.
1651.00 mm (millimeters)

65.0000 in (inches)

5.4167 ft (feet)
Height
The distance from the floor to the top-most part of the vehicle.
1398.00 mm (millimeters)

55.0394 in (inches)

4.5866 ft (feet)
Wheelbase
The horizontal distance between the centers of the front and rear wheels. The distance between the front and rear axle.
2443.00 mm (millimeters)

96.1811 in (inches)

8.0151 ft (feet)
Front track
The distance between the centers of the wheels on the front axle.
1418.00 mm (millimeters)

55.8268 in (inches)

4.6522 ft (feet)
Rear track
The distance between the centers of the wheels on the rear axle.
1417.00 mm (millimeters)

55.7874 in (inches)

4.6490 ft (feet)
Ground clearance
The distance from the lowest hanging point under the vehicle to the ground, measured with standard vehicle equipment, without cargo or passengers.
130.00 mm (millimeters)

5.1181 in (inches)

0.4265 ft (feet)
Weight
The weight of a vehicle with standard equipment and all necessary operating consumables, without passengers or cargo.
906 kg (kilograms)

1997.39 lb (pounds)
Weight front/rear
The percentage of weight distribution on the front and rear tyres.
-
Engine manufacturer
The name of the company, which has manufactured the enginge.
Fiat
Engine code
The code of the engine.
-
Engine displacement
The total volume of the air/fuel mixture an engine can produce during one complete cycle. The engine displacement is the sum if the displacement of its cylinders, which includes the volume of the space between the upper and lower dead point of every cylinder.
~ 1.6 l (liters)

1585 cc (cubic centimeters)
Number of cylinders
The total number of cylinders in the engine. A cylinder is the space, in which a piston moves between it's upper and lower dead point.
4
Cylinder arrangement
Information on how the cylinders in the engine are arranged. Some of the most common arrangements are: Inline, V and Boxer (opposite).
inline
Valves per cylinder
Most engines have two or more valves per cylinder to control the flow of gases and fluids at proper timings. Intake valves are used to control the flow of air and fuel into each cylinder, while the exhaust valves make sure exhaust gases leave the cylinder.
2
Bore
The diameter of the cylinder in the engine. Most internal combustion engines have bores in the 70 mm - 105 mm range.
84.00 mm (millimeters)

3.3071 in (inches)

0.2756 ft (feet)
Stroke
The length of the piston stroke within the cylinders. The distance the piston travels back-and-forth between it's upper and lower dead point.
71.50 mm (millimeters)

2.8150 in (inches)

0.2346 ft (feet)
Compression ratio
The ratio between the largest and the smallest volume of the combustion chamber when the piston is at the top of its stroke (smallest volume) and the bottom of its stroke (largest volume).
9.30:1
BMEP
Break mean effective pressure is the average pressure that acts on the piston. The higher the pressure is, the more optimized design has been achieved. BMEP takes into account engine's volume, rpm and power output.
152.92 psi (pounds per square inch)

1054.35 kPa (kilopascals)

10.54 bar (bars)
Aspiration
The type of aspiration. Some engines are naturally aspirated, while others are turbo/supercharged.
naturally-aspirated
Engine design
The design of the engine in regards to the number and arrangement of camshaft(s), intake and exhaust valves, etc.
double overhead camshaft (DOHC)
Sump type
The lubricating oil system used to oil the engine's parts. Lubrication prevents friction and respectively - wearing out of the elements, which are in contact while the engine is working. There are two main types of sump systems - wet and dry.
wet sump
Main bearings
The main bearings are the bearings on which the crankshaft rotates. The number of main bearings depends on the engine type.
-
Coolant
The type of engine coolant system used to remove the heat from the engine.
liquid
Intercooler
An air-to-air or air-to-liquid heat exchange device used between the turbo and the intake manifold to reduce the temperature of the air, which increases its density.
no
Engine location
The location of the engine in the vehicle - whether it is front mounted, middle mounted or rear mounted.
front
Engine alignment
The alignment/orientation of the engine in the vehicle. A transverse engine is mounted so that the engine's crankshaft axis is perpendicular to the long axis of the vehicle. Longitudinal engine is mounted so that the crankshaft is paralel to the long axis of the vehicle.
transverse
Fuel system
The fuel system type used to store and supply fuel in the cylinder chamber.
carburettor
Catalytic converter
It reduces the toxicity of the emissions from the engine by causing a chemical reaction that transforms harmful gases into less harmful substances.
no
Max power
The maximum amount of power the engine can produce.
77 kW (kilowatts)

105 ps (Pferdestärke)

104 hp (horse power)
Max power at rpm
The number of revolutions per minute at which the engine produces its maximum power.
6100 rpm (revolutions per minute)
Max torque
The maximum torque the engine can produce. Torque is the turning effect, produced when force is applied to rotate an object around an axis, fulcrum, or pivot.
133 Nm (newton meters)

98 ft-lb (foot-pounds)

13 kgm (kilogram meters)
Max torque at rpm
The number of revolutions per minute at which the engine produces its maximum torque.
4000 rpm (revolutions per minute)
Max speed
The maximum speed the vehicle can achieve.
180 km/h (kilometers per hour)

111.85 mph (miles per hour)
Max rpm
The maximum number of revolutions per minute of the crankshaft the engine is allowed to run.
-
0 - 60 mph
The time in seconds in which the vehicle accelerates from 0 to 60 miles per hour.
9.20 s (seconds)
0 - 100 km/h
The time in seconds the vehicle needs to accelerate from 0 to 100 kilometers per hour.
-
Quarter mile time
The time in seconds the vehicle needs to do a quarter mile.
17.00 s (seconds)
Drag coefficient (Cd/Cx/Cw)
Quantifies the resistance (drag) of the vehicle, while moving through the air. Contemporary automobiles achieve a drag coefficient from 0.30 to 0.35. Cd is also known as Cx in France and Cw in Germany
-
Frontal area (A)
The total surface area of the front of a vehicle that is exposed to the air flow.
-
Drag area (CdA)
Expresses the aerodynamic efficiency of the vehicle and is measured by multiplying the drag coefficient (Cd) and the frontal surface area (A). The lower the drag area is the more efficient aerodynamically the vehicle is.
-
Fuel capacity
The maximum amount of fuel that the vehicle's fuel tank can hold.
55.00 l (liters)

14.53 US gal (US gallons)

12.10 UK gal (UK gallons)
Fuel consumption - urban
The amount of fuel used by the vehicle to cover the distance of 100 kilometers where the speed varies from 0 to 50 km/h.
-
Fuel consumption - extra urban
The amount of fuel used by the vehicle to cover the distance of 100 kilometers where the speed varies from 80 to 120 km/h.
-
Fuel consumption - combined
The average amount of fuel consumed by the vehicle per unit distance in urban and extra-urban traffic.
-
CO2 emissions
Information about the carbone dioxide emitted by the vehicle. The average CO2 emissions rating is 167 grams of carbon dioxide per kilometer driven.
-
Suspension front
Information about the front suspension mechanism used in the vehicle. The mechanical system that connects the wheels and axles to the chassis of the vehicle.
anti-roll bar

coil springs

independent

lower wishbone

MacPherson strut

trailing link
Suspension rear
Information about the rear suspension mechanism used in the vehicle. The suspension contributes to the vehicle's handling and braking, isolates the passengers from the road noise and vibrations.
independent

lower wishbone

transverse leaf spring
Transmission
A transmission a.k.a gearbox adapts the output of the engine to the drive wheels. The transmission can increase the torque while reducing the speed of the crankshaft or do the opposite - reduce the torque while increasing the speed of the crankshaft.
manual
Number of gears
The number of gears in the transmision of the vehicle.
5
Top gear ratio
The gear ratio of the top gear. The gears ratio expresses the ratio between the number of teeth of the larger gear and the pinion, or simply put the ratio between the gears radiuses/diameters. E.g. the ratio of a gear with 24 teeth and a pinion with 13 teeth is 1.84:1.
0.96:1
Final drvie ratio
The final drive ratio expresses the ratio between the number of rotations of the drive shaft for one rotation of a wheel or the ratio between the number of revolutions of the pinion for one revolution of the drive axle.
3.59:1
Brakes front
The brake system used on the front wheels. In general, the brake system transmits the force from the brake pedal to the brake pads, which allows the vehicle to slow down and stop.
disks
Brakes rear
Information about the brake system used on the rear wheels.
drums

servo assistance
Front brake diameter
The diameter of the front brake disks. The brake disk is located between the brake pads, which when forced against both sides of the disk slow and stop the rotation of the wheel.
257.00 mm (millimeters)

10.1181 in (inches)

0.8432 ft (feet)
Rear brake diameter
The diameter of the rear brake disks.
-
Wheels front
The size/type of the front wheels. For example in "7.5J x 16", the first number represents the width in inches, the second one represents the height in inches. The letter J represents the wheel contour.
-
Wheels rear
The size/type of the rear wheels used in the vehicle.
-
Tyres front
The size/type of the front tyres. For example in the tyre code "225/55 R 16" the first number stands for width in mm, the second number stands for aspect ratio of height to width in %, R stands for construction type (radial) and 16 stands for wheel diameter in inches.
165/65 SR 14
Tyres rear
The size/type of the rear tyres used in the vehicle.
165/65 SR 14
Turning circle
The smallest possible diameter of the circle described by the outside wheels when the vehicle is turning on full lock.
10.30 m (meters)

405.5118 in (inches)

33.7927 ft (feet)
Steering
Information about the design of the mechanism used in the vehicle which allows it to follow the desired course. The steering mechanism aims to ensure that the wheels are pointing in the desired directions.
rack and pinion
Turns lock to lock
The number of complete rotations a steering wheel makes when turned from one extreme lock position to the other. For example, from extreme left to extreme right.
3.5
carinf.com is not responsible for the accuracy of the information it publishes - technical data, characteristics, specifications, indicators, etc. All manufacturers' logos, marques, and all other trademarks are the property of their respective owners.
cookie policy © carinf.com