Pontiac G5 Coupe is a front wheel drive (FWD) fixed-head coupe that has 2 doors and 5 seats. It is launched in 2008. The measurements of the vehicle are as follows: height - 1413.00 mm, width - 1716.00 mm, length - 4567.00 mm. Furthermore, the front and rear track are 1490.00 mm and 1475.00 mm respectively and the wheelbase is 2629.00 mm. The ground clearance is 136.00 mm. 1357 kg is the curb weight. Pontiac G5 Coupe has a naturally-aspirated, double overhead camshaft (DOHC) engine with 4 cylinders with 4 valves per cylinder and engine displacement of 2198 cc. It is positioned in the front of the vehicle and has a transverse alignment. The cylinders are inline-arranged. The cylinder diameter is 86.00 mm and the piston stroke length is 94.60 mm. The compression ratio is 10.00:1. The maximum power and maximum torque of the engine are 110 kW / 150 ps at 5600 rpm and 207 Nm at 4200 rpm respectively. The fuel system of this model is multi-point fuel injection (MPFI). The engine's oiling system is wet sump. The Pontiac G5 Coupe has a 5-speed manual transmission. The top gear ratio is 0.81:1. 3.84:1 is its final drive ratio. 49.20 l is the capacity of the fuel tank. The vehicle has a variable power assisted rack and pinion steering box. The steering wheel can make 3.6 complete rotations from one extreme position to another. The front suspension includes anti-roll bar, independent, MacPherson strut and the rear suspension - anti-roll bar, torsion/twist beam axle. The type/size of the front tyres is P195/60 R 15. The type/size of tyres in the rear is P195/60 R 15. The front brakes are set up with ventilated disks. The rear brakes are fitted with drums, servo assistance. The diameter of the front brakes is 256.00 mm and the one of the rear brakes is 230.00 mm.
The name of the company, which has manufactured this vehicle.
The series the vehicle's model belongs to.
The model name of the vehicle.
The code provided by the manufacturer, which marks this model.
A family this model belongs to.
The year since the model has been in production.
|Type of vehicle|
Information about the body type of this vehicle.
The type of the drive system used in the vehicle.
|front wheel drive (FWD)|
|Number of seats|
The number of seats the vehicle has.
|Number of doors|
The number of doors the vehicle has.
The distance from the rear-most point to the front-most point of the vehicle.
|4567.00 mm (millimeters)|
179.8031 in (inches)
14.9836 ft (feet)
The width of the vehicle. Devices like door handles, mirrors and lights usually are not included in the calculation of the width. The width is measured with doors and windows closed and the wheels in a straight-ahead position.
|1716.00 mm (millimeters)|
67.5591 in (inches)
5.6299 ft (feet)
The distance from the floor to the top-most part of the vehicle.
|1413.00 mm (millimeters)|
55.6299 in (inches)
4.6358 ft (feet)
The horizontal distance between the centers of the front and rear wheels. The distance between the front and rear axle.
|2629.00 mm (millimeters)|
103.5039 in (inches)
8.6253 ft (feet)
The distance between the centers of the wheels on the front axle.
|1490.00 mm (millimeters)|
58.6614 in (inches)
4.8885 ft (feet)
The distance between the centers of the wheels on the rear axle.
|1475.00 mm (millimeters)|
58.0709 in (inches)
4.8392 ft (feet)
The distance from the lowest hanging point under the vehicle to the ground, measured with standard vehicle equipment, without cargo or passengers.
|136.00 mm (millimeters)|
5.3543 in (inches)
0.4462 ft (feet)
The weight of a vehicle with standard equipment and all necessary operating consumables, without passengers or cargo.
|1357 kg (kilograms)|
2991.67 lb (pounds)
The percentage of weight distribution on the front and rear tyres.
|60.00% / 40.00%|
The name of the company, which has manufactured the enginge.
The code of the engine.
The total volume of the air/fuel mixture an engine can produce during one complete cycle. The engine displacement is the sum if the displacement of its cylinders, which includes the volume of the space between the upper and lower dead point of every cylinder.
|~ 2.2 l (liters)|
2198 cc (cubic centimeters)
|Number of cylinders|
The total number of cylinders in the engine. A cylinder is the space, in which a piston moves between it's upper and lower dead point.
Information on how the cylinders in the engine are arranged. Some of the most common arrangements are: Inline, V and Boxer (opposite).
|Valves per cylinder|
Most engines have two or more valves per cylinder to control the flow of gases and fluids at proper timings. Intake valves are used to control the flow of air and fuel into each cylinder, while the exhaust valves make sure exhaust gases leave the cylinder.
The diameter of the cylinder in the engine. Most internal combustion engines have bores in the 70 mm - 105 mm range.
|86.00 mm (millimeters)|
3.3858 in (inches)
0.2822 ft (feet)
The length of the piston stroke within the cylinders. The distance the piston travels back-and-forth between it's upper and lower dead point.
|94.60 mm (millimeters)|
3.7244 in (inches)
0.3104 ft (feet)
The ratio between the largest and the smallest volume of the combustion chamber when the piston is at the top of its stroke (smallest volume) and the bottom of its stroke (largest volume).
Break mean effective pressure is the average pressure that acts on the piston. The higher the pressure is, the more optimized design has been achieved. BMEP takes into account engine's volume, rpm and power output.
|170.81 psi (pounds per square inch)|
1177.69 kPa (kilopascals)
11.78 bar (bars)
The type of aspiration. Some engines are naturally aspirated, while others are turbo/supercharged.
The design of the engine in regards to the number and arrangement of camshaft(s), intake and exhaust valves, etc.
|double overhead camshaft (DOHC)|
The lubricating oil system used to oil the engine's parts. Lubrication prevents friction and respectively - wearing out of the elements, which are in contact while the engine is working. There are two main types of sump systems - wet and dry.
The main bearings are the bearings on which the crankshaft rotates. The number of main bearings depends on the engine type.
The type of engine coolant system used to remove the heat from the engine.
An air-to-air or air-to-liquid heat exchange device used between the turbo and the intake manifold to reduce the temperature of the air, which increases its density.
The location of the engine in the vehicle - whether it is front mounted, middle mounted or rear mounted.
The alignment/orientation of the engine in the vehicle. A transverse engine is mounted so that the engine's crankshaft axis is perpendicular to the long axis of the vehicle. Longitudinal engine is mounted so that the crankshaft is paralel to the long axis of the vehicle.
The fuel system type used to store and supply fuel in the cylinder chamber.
|multi-point fuel injection (MPFI)|
It reduces the toxicity of the emissions from the engine by causing a chemical reaction that transforms harmful gases into less harmful substances.
The maximum amount of power the engine can produce.
|110 kW (kilowatts)|
150 ps (Pferdestärke)
148 hp (horse power)
|Max power at rpm|
The number of revolutions per minute at which the engine produces its maximum power.
|5600 rpm (revolutions per minute)|
The maximum torque the engine can produce. Torque is the turning effect, produced when force is applied to rotate an object around an axis, fulcrum, or pivot.
|207 Nm (newton meters)|
152 ft-lb (foot-pounds)
21 kgm (kilogram meters)
|Max torque at rpm|
The number of revolutions per minute at which the engine produces its maximum torque.
|4200 rpm (revolutions per minute)|
The maximum speed the vehicle can achieve.
The maximum number of revolutions per minute of the crankshaft the engine is allowed to run.
|6750 rpm (revolutions per minute)|
|0 - 60 mph|
The time in seconds in which the vehicle accelerates from 0 to 60 miles per hour.
|0 - 100 km/h|
The time in seconds the vehicle needs to accelerate from 0 to 100 kilometers per hour.
|Quarter mile time|
The time in seconds the vehicle needs to do a quarter mile.
|Drag coefficient (Cd/Cx/Cw)|
Quantifies the resistance (drag) of the vehicle, while moving through the air. Contemporary automobiles achieve a drag coefficient from 0.30 to 0.35. Cd is also known as Cx in France and Cw in Germany
|Frontal area (A)|
The total surface area of the front of a vehicle that is exposed to the air flow.
|Drag area (CdA)|
Expresses the aerodynamic efficiency of the vehicle and is measured by multiplying the drag coefficient (Cd) and the frontal surface area (A). The lower the drag area is the more efficient aerodynamically the vehicle is.
The maximum amount of fuel that the vehicle's fuel tank can hold.
|49.20 l (liters)|
13.00 US gal (US gallons)
10.82 UK gal (UK gallons)
|Fuel consumption - urban|
The amount of fuel used by the vehicle to cover the distance of 100 kilometers where the speed varies from 0 to 50 km/h.
|Fuel consumption - extra urban|
The amount of fuel used by the vehicle to cover the distance of 100 kilometers where the speed varies from 80 to 120 km/h.
|Fuel consumption - combined|
The average amount of fuel consumed by the vehicle per unit distance in urban and extra-urban traffic.
Information about the carbone dioxide emitted by the vehicle. The average CO2 emissions rating is 167 grams of carbon dioxide per kilometer driven.
Information about the front suspension mechanism used in the vehicle. The mechanical system that connects the wheels and axles to the chassis of the vehicle.
Information about the rear suspension mechanism used in the vehicle. The suspension contributes to the vehicle's handling and braking, isolates the passengers from the road noise and vibrations.
torsion/twist beam axle
A transmission a.k.a gearbox adapts the output of the engine to the drive wheels. The transmission can increase the torque while reducing the speed of the crankshaft or do the opposite - reduce the torque while increasing the speed of the crankshaft.
|Number of gears|
The number of gears in the transmision of the vehicle.
|Top gear ratio|
The gear ratio of the top gear. The gears ratio expresses the ratio between the number of teeth of the larger gear and the pinion, or simply put the ratio between the gears radiuses/diameters. E.g. the ratio of a gear with 24 teeth and a pinion with 13 teeth is 1.84:1.
|Final drvie ratio|
The final drive ratio expresses the ratio between the number of rotations of the drive shaft for one rotation of a wheel or the ratio between the number of revolutions of the pinion for one revolution of the drive axle.
The brake system used on the front wheels. In general, the brake system transmits the force from the brake pedal to the brake pads, which allows the vehicle to slow down and stop.
Information about the brake system used on the rear wheels.
|Front brake diameter|
The diameter of the front brake disks. The brake disk is located between the brake pads, which when forced against both sides of the disk slow and stop the rotation of the wheel.
|256.00 mm (millimeters)|
10.0787 in (inches)
0.8399 ft (feet)
|Rear brake diameter|
The diameter of the rear brake disks.
|230.00 mm (millimeters)|
9.0551 in (inches)
0.7546 ft (feet)
The size/type of the front wheels. For example in "7.5J x 16", the first number represents the width in inches, the second one represents the height in inches. The letter J represents the wheel contour.
The size/type of the rear wheels used in the vehicle.
The size/type of the front tyres. For example in the tyre code "225/55 R 16" the first number stands for width in mm, the second number stands for aspect ratio of height to width in %, R stands for construction type (radial) and 16 stands for wheel diameter in inches.
|P195/60 R 15|
The size/type of the rear tyres used in the vehicle.
|P195/60 R 15|
The smallest possible diameter of the circle described by the outside wheels when the vehicle is turning on full lock.
Information about the design of the mechanism used in the vehicle which allows it to follow the desired course. The steering mechanism aims to ensure that the wheels are pointing in the desired directions.
|variable power assisted rack and pinion|
|Turns lock to lock|
The number of complete rotations a steering wheel makes when turned from one extreme lock position to the other. For example, from extreme left to extreme right.
carinf.com is not responsible for the accuracy of the information it publishes - technical data, characteristics, specifications, indicators, etc. All manufacturers' logos, marques, and all other trademarks are the property of their respective owners.