Home Fiat Idea Idea 1.9 Multijet

Fiat Idea 1.9 Multijet is a front wheel drive (FWD) multi-purpose vehicle that has 5 seats and 5 doors. This model has been fabricated for the first time in 2003. The vehicle has the following measurements: height - 1660.00 mm, width - 1697.00 mm, length - 3929.00 mm. Furthermore, the wheelbase is 2507.00 mm, the front track is 1433.00 mm and the rear track is 1425.00 mm. 1274 kg is the curb weight. Fiat Idea 1.9 Multijet has a turbocharged, 1910 cc engine with engine with single overhead camshaft (SOHC) and 4 cylinders with 2 valves per cylinder. It is located in the front of the vehicle and its alignment is transverse. Its cylinders are inline-arranged. The piston stroke length is 90.40 mm and the cylinder diameter is 82.00 mm. The compression ratio of the pistons is 18.00:1. The maximum torque generated by the engine is 261 Nm at 1750 rpm and its maximum torque is 73 kW / 99 ps at 4000 rpm. This model has a common rail fuel system. The oiling system used for lubricating the engine's parts is wet sump. From 0 to 100 km/h the vehicle can accelerate for 11.50 s. The automobile can make one kilometer for 33.00 s. The Fiat Idea 1.9 Multijet has a manual 5-speed transmission. The top gear ratio is 0.69:1. 3.63:1 is its final drive ratio. The urban fuel consumption of this automobile is 7.02 l/100 km, the extra urban fuel consumption is 4.66 l/100 km and the combined is 5.45 l/100 km. 47.00 l is the volume of the fuel tank. The CO₂ emission rating is 146 g/km. The vehicle's steering box is power assisted rack and pinion type. The rear suspension includes independent, torsion bar and the front suspension - anti-roll bar, independent, MacPherson strut. The front wheels size is 6J x 14. The size of the rear wheels is 6J x 14. The front tyres are 185/60 R 15 88T. The tyres in the rear are 185/60 R 15 88T. The front brakes are set up with ventilated disks. The rear brakes are equipped with drums. The front brakes diameter is 284.00 mm and the rear brakes diameter is 228.00 mm.